The Lead T-caps will be used for masonry restoration in historic buildings
West Bridgewater, MA, 7/29/2019 – Nuclead Inc., a leader in lead materials and lead products announces the shipment of several orders for Lead T-Caps to be used for architectural restoration. The orders were shipped to contractors throughout the USA and Canada
Lead T-Caps
T-Caps are lead extrusions that are used in sealing a stone or brick joint. T-Caps are a soft lead strip which when set and bedded in caulking compound/sealant, forms a cap which provides a permanent elastic seal for any masonry joint. After installation, the surface oxidizes rapidly to a neutral grey which blends with the masonry.T caps are perfect for the inclement wet weather and harsh winters of New England and the northern states and Canada.
T-Caps are used in architectural or historic building preservation, Nuclead supplies t-caps in accordance with U.S. General Services Administration (GSA) Historic Preservation Technical Procedures Code: #07656-01 & #765601S.
Nuclead offers FREE samples of lead T-Caps to those involved in architectural renovation and repair. Call (508) 583-2699 for details.
Here are recent shipments of Lead T-Caps
- Lead Extrusions: Weather-T- Caps: 1.00″ wide x 11/16″ joint depth x 25# (Ref: 40′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold to a masonry company in Canada for restoration of a stone wall.
- Lead Extrusions: Weather-T- Caps: 1.00″ wide x 11/16″ joint depth x 25# (Ref: 40′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold to a General contractor in New York for a restoration project of existing joint caulk and sealant failure. The locations such as a masonry/stone parapet, coping, balustrade, railing, cornice, belt course ledges, or any other exterior masonry/stone features where the top surface is exposed. This also includes corner and fillet joints where a horizontal surface joins to a vertical surface; with horizontal protection to extend down over front and back edges 2″ or to an appropriate stopping point to protect the exposed corner.
- Lead Extrusions: Weather-T- Caps: 11/16″ wide x 1/2” joint depth x 25# (Ref: 60′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold and delivered to a general contractor in Oklahoma for a masonry restoration project.
- Lead Extrusions: Weather-T- Caps: 11/16″ wide x 1/2” joint depth x 25# (Ref: 60′) spool(s). Min buy: 25#; “Type A” = Flat cap. Delivered to a Contractor in New York for a park restoration project.
- Pick and ship Lead Extrusions: Weather-T- Caps: 1″ wide x .687″ joint depth x 25# (Ref: 40′) spool(s). Min buy: 25#; “Type A” = Flat cap; Sold to a local waterproofing form for their standard inventory.
- Lead Extrusions: Weather-T- Caps: 11/16″ wide x 1/2” joint depth x 25# (Ref: 60′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold to a local waterproofing and restoration company for a local project.
- Lead Extrusions: Weather-T- Caps: .687″ wide x .500″ joint depth x 25# (Ref: 60′) spool(s). “Type A” = Flat cap. Sold to a restoration company in the mid-west for a stone restoration project in Chicago, IL.
- Lead Extrusion: Weather-T- Caps: 11/16″ wide x 1/2” joint depth x 25# (Ref: 60′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold to a local waterproofing company for several stone foundation repairs in the local area.
- Lead Extrusions: Weather-T- Caps: 1.50″ wide x 13/16″ joint depth x (Ref: Approx.; Three 7′ long lengths per 25# billet extruded). 25# min. buy required; “Type A” = Flat cap. Sold to a restoration corporation in the north east for their own inventory.
- Sell Lead Extrusions: Weather-T- Caps: 1″ wide x .687″ joint depth x 25# (Ref: 40′) spool(s). “Type A” = Flat cap; Per U.S. General Services Administration (GSA) Historic Preservation Technical Procedures Codes: Sold to a weatherproofing company in Virginia for a waterproofing project in their city.
- Lead Extrusions: Weather-T- Caps: 1.00″ wide x 11/16″ joint depth x 25# (Ref: 40′) spool(s). “Type A” = Flat cap. Sold to a Masonry Corporation in New England for waterproofing stonework using the weathercap materials as stone flashing.
- Lead Extrusions: Weather-T- Caps: .687″ wide x .500” joint depth x 25# (Ref: 60′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold to a restoration company in Pennsylvania for current projects.
- Lead Extrusions: Weather-T- Caps: 1″ wide x .687″ joint depth x 25# (Ref: 40′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold to a restoration company in Massachusetts for a new restoration project
- Lead Extrusions: Weather-T- Caps: .687″ wide x .500” joint depth x 25# (Ref: 60′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold to a specialized building company in New York for a new project requiring lead weather stripping.
- Lead Extrusions: Weather-T- Caps: 1″ wide x .687″ joint depth x 25# (Ref: 40′) spool(s). Min buy: 25#; “Type A” = Flat cap. Sold to a restoration company in Cincinnati, OH.
Fabricate and ship Lead Extrusions: Weather-T- Caps: 1″ wide x .687″ joint depth x 25# (Ref: 40′) spool(s). “Type A” = Flat cap. Sold to a waterproofing firm in the Southwest for a back log of work pending.
About Nuclead
Nuclead Mfg Co Inc. is the leading worldwide supplier of innovative Shielding, and X-ray inspection products. With nearly 40 years in providing advanced Shielding & X-ray security systems, the Company’s product line utilizes a combination of technologies, and expertise unmatched by any other company.
These technologies offer superior service and products. Nuclead’s has a complete range of lead products including shielding for cargo inspection, baggage screening and passenger screening systems for facility and aviation security.
Nuclead also supplies products for the Nuclear & energy, Oil, Construction, Manufacturing, X-ray, medical & research, Elevator, Marine/boating, Bridge and Sporting industries.
Nuclead’s sophisticated products are used to protect high-threat facilities and help combat terrorism and trade fraud; Gamma ray, Neutron, & X-ray shielding; and counterweight – ballast- & weight requirements. Nuclead customers include Major Universities & Research centers, Leading government agencies, Military bases, General contractors, Manufactures, Hospitals and Corporations worldwide; including the U.S. Department of Defense (DOD), and branches of the U.S. Military.
For more information on Nuclead’s products, services and technologies, please visit https://nuclead.com/or https://www.nucleadinc.com/.
SOURCE: Nuclead Co. Inc.